ATLAS III in situ heating test in boom clay: Field data,observation and interpretation   总被引：1，自引：0，他引：1  

G.J. Chen  X. Sillen  J. Verstricht  X.L. Li 《Computers and Geotechnics》2011

The ATLAS III small scale in situ heating test aimed at assessing the thermo-hydro-mechanical (THM) effects on the Boom clay of the significant temperature gradients generated in this host rock as a consequence of the geological disposal of radioactive, heat-emitting wastes. This paper presents data on temperature, pore water pressure and total stress measured during the experiment and highlights several interesting observations regarding the thermal anisotropy and THM coupling in the Boom clay. The test has a simple geometry and well defined boundary conditions, which facilitates the comparison between measurement and numerical modeling studies. These studies included three dimensional coupled THM modeling of the test. The good agreement between measurement and numerical modeling of temperature and pore water pressure yields a set of THM parameters and confirms the thermo-mechanical anisotropy of the Boom clay.  相似文献   

冻土中几类力学试验方法的探讨   总被引：3，自引：2，他引：1  

徐湘田  赖远明  刘峰  常小晓  董元宏 《冰川冻土》2011,33(5):1132-1138

获取寒区工程设计中冻土的物理力学指标及冻土本构模型中的模型参数都离不开冻土的力学试验.随着对冻土力学性质研究的深入,需要考察更多加载路径下冻土的力学行为,这也是检验已有冻土本构模型的有效途径.因此,精确的冻土力学试验是认识冻土力学性质的基本手段.为进一步考察冻土的力学性质,提高冻土力学试验的精度,应用MTS-810低温...  相似文献   

寒冷地区无压输水暗渠运行模型试验研究   总被引：2，自引：1，他引：1  

刘德仁  赖远明  张东  张世民 《冰川冻土》2011,33(6):1323-1329

根据我国北方寒冷地区某无压输水暗渠工程实际,通过在室内环境箱中进行暗渠比例模型试验,研究暗渠在冬季输水过程中水流温度受外界环境温度、流速及进水口水温的影响.通过改变试验条件,研究了暗渠模型内水流温度降低与外界环境温度、水流流速及进水口水温的关系.经过数据拟合,得到暗渠水流温度与环境温度、水流流速及进水口水温的回归公式,...  相似文献   

寒区工程动荷载模型试验系统设计   总被引：1，自引：1，他引：0  

赵淑萍  马巍  焦贵德  罗飞 《冰川冻土》2011,33(4):826-832

寒区工程动荷载模型试验系统主要由模型试验槽、制冷及控温装置、动力加载装置、传感器和数据采集系统四部分组成．系统具有如下特点：能根据实际工程对长3m、宽2．5rn和高1m的模型试验土体进行低温动荷载试验;采用3组冷冻板给土体降温,降温速度快,能提供的最低温度为-20℃,而且能提供多组均匀、稳定的温度边界,冷冻板的温度波动...  相似文献   

面雨量在城市内涝预报中的应用试验          下载免费PDF全文

李苗  逯张禹  胡志新 《气象与环境科学》2011,34(4):19-25

以太原市历史上10次城市积水过程资料和2005年8月16日典型暴雨沥涝个例为基本试验数据,在37°47’-38°00’N、112°28’-112°36’E试验区域内,剖分为1×1km^2的规则网格,中心城区再一分为四,网格面积为0．25km^2,共计477个规则网格。分别把细网格雨量法、二次曲面法、泰森多边形法计算的面...  相似文献   

大地震的18.6年周期   总被引：1，自引：0，他引：1       下载免费PDF全文

杜品仁  赵俊猛  高祥林 《地球物理学报》2011,54(9):2256-2262

将全球分为15个研究区,用1900~2009年M_W≥7.0地震目录,统计分析了各区大地震与月球交点运动周期的关系,得出15个研究区中有10个区,大地震存在统计意义上的18.6 a周期:活跃段为12.4 a,平静段为6.2 a;环太平洋地震带北、南、西、东4大区的大地震,不仅有这样的周期,而且其地震活跃段的时间存在一定规律.用第6个18.6 a(1991~2009年)期间的大地震,检验据前5个18.6 a(1900~1990年)地震目录所得18.6 a 周期的稳定性和实用性,发现有这种周期的地区多数的周期性是稳定的.大地震18.6 a周期的可能成因有: (1)18.6 a潮波通过调制日潮和半日潮调制大地震; (2)上地幔内流体的潮汐(地内潮)作用; (3)18.6 a潮波通过影响地球自转变化调制大地震.  相似文献   

Tall building vibration control using a TM‐MR damper assembly: Experimental results and implementation     

Rene Zemp  Juan C. de la Llera  Paul Roschke 《地震工程与结构动力学》2011,40(3):257-271

This paper summarizes the relevant results of the design, construction, testing, and implementation of a nominal 120 kN magnetorheological damper developed to control a free‐plan tall building in Santiago, Chile, equipped with two 160‐ton tuned masses. Cyclic as well as hybrid simulation tests were performed on the prototype damper. Global building responses using measured MR properties showed good correlation with analytical estimations. Also, a proposed physical controller for the MR damper was validated through hybrid and building pull‐back tests. Its performance is essentially equivalent to that of an LQR controller, but the information needed in its implementation is considerably less. Pull‐back tests of 10 cm amplitude were performed on one mass along the flexible edge of the building and its response controlled using the passive and controlled modes of the MR damper. The MR damper was capable of controlling the TM displacements very effectively, as well as the simulated building response for different ground motions and harmonic excitation. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Theory and experimental study for sliding isolators with variable curvature     

Lyan‐Ywan Lu  Shih‐Wei Yeh 《地震工程与结构动力学》2011,40(14):1609-1627

Because a conventional isolation system with constant isolation frequency is usually a long‐period dynamic system, its seismic response is likely to be amplified in earthquakes with strong long‐period wave components, such as near‐fault ground motions. Seismic isolators with variable mechanical properties may provide a promising solution to alleviate this problem. To this end, in this work sliding isolators with variable curvature (SIVC) were studied experimentally. An SIVC isolator is similar to a friction pendulum system (FPS) isolator, except that its sliding surface has variable curvature rather being spherical. As a result, the SIVC's isolation stiffness that is proportional to the curvature becomes a function of the isolator displacement. By appropriately designing the geometry of the sliding surface, the SIVC is able to possess favorable hysteretic behavior. In order to prove the applicability of the SIVC concept, several prototype SIVC isolators, whose sliding surfaces are defined by a sixth‐order polynomial function, were fabricated and tested in this study. A cyclic element test on the prototype SIVC isolators and a shaking table test on an SIVC isolated steel frame were all conducted. The results of both tests have verified that the prototype SIVC isolators do indeed have the hysteretic property of variable stiffness as prescribed by the derived formulas in this study. Moreover, it is also demonstrated that the proposed SIVC is able to effectively reduce the isolator drift in a near‐fault earthquake with strong long‐period components, as compared with that of an FPS system with the same friction coefficient. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Shaking table test and analysis method on ultimate behavior of slender base‐isolated structure supported by laminated rubber bearings     

Eiji Takaoka  Arinori Nimura 《地震工程与结构动力学》2011,40(5):551-570

This paper describes the results of shaking table tests to ascertain the ultimate behavior of slender base‐isolated buildings and proposes a time history response analysis method, which can predict the ultimate behavior of base‐isolated buildings caused by buckling fracture in laminated rubber bearings. In the tests, a base‐isolated structure model weighing 192 kN supported by four lead rubber bearings is used. The experimental parameters are the aspect ratio of height‐to‐distance between the bearings and the shape of and the axial stress on the bearings. The test results indicate that the motion types of the superstructure at large input levels can be classified into three types: the sinking type; the uplift type; and the mixed type. These behaviors depend on the relationship between the static ultimate lateral uplifting force on the superstructure and the lateral restoring characteristics of the base‐isolated story. In the analysis method, bearing characteristics are represented by a macroscopic mechanical model that is expanded by adding an axial spring to an existing model. Nonlinear spring characteristics are used for its rotational, shear, and axial spring. The central difference method is applied to solve the equation of motion. To verify the validity of the method, simulation analysis of the shaking table tests are carried out. The results of the analysis agree well with the test results. The proposed model can express the buckling behavior of bearings in the large deformation range. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Morlet小波显著性检验和精度分析在地磁场和地震活动性周期分析中的应用   总被引：3，自引：0，他引：3       下载免费PDF全文

尹继尧  朱元清  宋治平  张国民  薛艳  刘杰 《地震学报》2011,33(5):663-671

首先通过对加入随机噪声的合成信号进行Morlet小波变换并进行显著性检验, 分析所得信号的周期成分的显著性和非显著性, 然后研究信号周期长短、 信号观测时间段长短与精度之间的关系．在此基础上,以活动周期比较稳定的太阳黑子活动作为实例分析,结果显示本文的精度分析和显著性检验方法对于周期谱的精度和显著性研究是可行的．最后将该方法应用于全球地震活动周期谱的分析,求出全球地震活动周期谱及其显著性与精度．研究结果表明,在利用Morlet小波分析地磁场和地震活动性周期时引入显著性检验,并结合本文给出的精度, 可以从数据中提取出周期谱及其显著性和精度．   相似文献